450+ Sales Representatives
AMO® IV SCREW
SCR-DWL-RW40-(A2K)-7,5X102MM
Art.-no. 0234941102
EAN 4062856952458
Individual price display after login
Exclusively for registered customers
Register now and access more than 20,000 products
For fastening wooden or steel elements to concrete or masonry.
- Zinc plated steel, blue passivated
- Large washer head for improved lifting capacity
- Mechanically interlocking, removable anchorage free from expansion pressure
- Load-bearing capacity is retained even under thermal loads.
- RW40 recess for longer bit service life, improved power transmission and no ejection forces
- Can be loaded immediately - no need to wait after installation
- Removable
- Virtually no expansion forces during installation
Notice
For drilling perforated brick and hollow concrete block using a drill (without hammer function).
The Timber Connect screw anchor can be used for "nominal fastening" of base plates in concrete as specified in AS1684.2-2010, Section 9.5, Table 9.4. Use the table below to determine the suitability of the pull-out loads specified in the table for the required lifting capacities of the specific fasteners as described in AS1684.2.2010, Section 9.6, Table 9.11.
Product information
Datasheets(X)
Application area
- 102 mm: suitable for fastening wooden base panels to concrete slabs
- 62 mm: suitable for installing steel frames in concrete slabs
- Both horizontal and vertical installation of elements in concrete or brick is possible.
 | |
Length (l) | 102 mm |
Thread diameter (d) | 7.5 mm |
Material | Steel |
Surface | Zinc plated |
Head type | Round washer head |
Head diameter (d(h/k)) | 22 mm |
Internal drive | RW40 |
Nominal drill hole diameter | 6.0 mm |