Welcome to Würth Australia

More than 15,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

Cutting disc Speed plus for stainless steel

Cutting disc for stainless steel Speed plus

Art.-no. 0664131248

Prices for customers after login

Cutting disc Speed plus for stainless steel

Art.-no. 0664131248

Prices for customers after login



Exclusively for registered customers

Register now and access more than 15,000 products

Especially for thin-walled pipes and profiles, thin metal sheets, bodywork panels etc.
  • Extreme cutting capacity (very short cutting times) with very long service life

  • Extremely thin for precise, virtually burr and chatter-free cuts (very clean and cool cutting surfaces)

  • Very comfortable operation available to protect the user and machine

  • Low cutting waste and dust formation

  • Low noise development and high break resistance

  • Free of iron, chlorine and sulphur (≤ 0.1%)
  • Storage: Dry, at 20°C room temperature

  • Work only with appropriate protective clothing

  • Always use an appropriate protective hood when performing cutting work

  • Work only with undamaged discs

  • Do not jam/tilt the discs during cutting — increased risk of breakage!

  • Ensure proper contact pressure

  • Always clamp cutting discs (straight design) with metal ring towards machine

Product information

Wurth Catalogue(X)

Catalogue page as PDF 1  |  2

Flip catalog



Application area
  • Stainless steel sheets, non-alloyed stainless steels, alloyed and high-alloy steels, rust- and acid-proof steels, chrome-nickel steels

  • Cutting pipes, ventilation ducts, sheet metal (e.g. containers, sheet metal constructions), pipework, rods, steel reinforcements, profiles and rails (sanitary facilities), cable trays and cable ducts, power cables, steel cables, composite materials, plastics, etc.

Versatility (points system)

2 of 4 points

Service life (points system)

3 of 4 points

Cutting ability (point system)

4 of 4 points

Handling/user-friendliness (point system)

3 of 4 points

Cut quality (point system)

3 of 4 points


125 mm


0.8 mm

Drill hole

22.23 mm



Max. rotation speed

12250 rpm

Max. circumferential speed

80 m/s

Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Wurth Catalogue

Catalogue page as PDF  | 


Datasheets ()

CAD data  | 




Technical information