Welcome to Würth Australia

More than 15,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

Brake fluid DOT 4

Brake fluid DOT 4 SELECTED

Art.-no. 0892009050

Prices for customers after login

Brake fluid DOT 4

Art.-no. 0892009050

Prices for customers after login



Exclusively for registered customers

Register now and access more than 15,000 products

For hydraulic brake and clutch systems.

Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3)

Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual.

Min. dry boiling point 260°C. Min. wet boiling point 165°C


Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs.

Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water. When using Würth 5-litre brake fluids, pierce the centre of the foil seal and screw on the tap. Do not attempt to remove the foil seal, as this will prevent the tap from being properly sealed.

Product information

Wurth Catalogue(X)

Catalogue page as PDF 1

Flip catalog


Safety data sheet


Application area



Brake fluid must be changed every 2 years. Follow the vehicle manufacturer's recommendations when adding brake fluid.


500 ml


Pale Amber

Chemical basis


Shelf life from production

36 Month

Min. wet boiling point

165 °C

Min. dry boiling point

260 °C


1.052 g/ml

Density conditions

at 20°C

pH value


Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Wurth Catalogue

Catalogue page as PDF  | 


Datasheets ()

CAD data  | 




Technical information