2C plastic adhesive Replast<SUP>®</SUP> ME 30 sec. - ADH-PLA-2C-REPLAST-30S-50ML

2C plastic adhesive Replast^® ME 30 sec.

Name: 2C plastic adhesive Replast ® ME 30 sec.
Brand: Wurth
SKU: 0893500050

2C plastic adhesive Replast ME 30 s
ADH-PLA-2C-REPLAST-30S-50ML

Art.-no. 0893500050

EAN 4065746432214

All versions

Specification

2C adhesive for repairing and connecting plastic parts

An adhesive for virtually every type of plastic

Easy to handle various adhesive types

Can be used for repairs and structural bonding

Certified in accordance with NSF P1 and EMICODE EC1+

Special shorter positive mixer

Optimum mixing with minimum volumes

Little adhesive wastage

Repair compound cures quickly, is flexible and can be sanded in a very short amount of time

Excellent chemical resistance to a range of liquids, such as petrol, a large number of lubricating oils and ethyl acetate

Our products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.

Notice

Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluoroethylene). There may be adhesion problems in individual cases due to the coatings and release agents used in some cases in the plastic production process. Check material compatibility on a non-visible area if necessary.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Suitable for bonding carbon fibres

Application

Application area

For easy repair and connection of plastic parts such as spoilers, radiator grilles, trim clips, brackets on headlights, aprons, bumpers, wheel arches, etc. Suitable for use in the food industry (NSF P1)

Instructions

The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. Observe the processing instructions. For more information, refer to the technical data sheet.

Technical information

Contents	50 ml
Container	Double cartridge
Chemical basis	Two-component polyurethane
Colour	Black
Density	1.27 g/cm³
Working life	30 s
Full curing speed/conditions	0.5 mm/min / 23°C and 50% relative humidity, moisture curing
Min./max. processing temperature	15 to 25 °C
Min./max. temperature resistance	-40 to 100 °C
Solvent-free	Yes
Shelf life from production/conditions	24 Month / at 23°C and 50% relative humidity, no exposure to direct sunlight
Sustainability	Pollutants / Emissions
Min. combined tension and shear resistance	20 MPa
Shore D hardness	70 +/- 5

Documents

Product information

Wurth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Delivery scope

including:

2 x

STATSTATMIXTUB-ADH-2C

Art.-no. 0891486

Description: For 2C plastic adhesive

Quantity: 2 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).