Welcome to Würth Australia

More than 20,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML
All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML - 1
All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML - 2
All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML - 3
All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML - 4
All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML - 5
All-rounder injectable mortar WIT-VM 250 - ANC-MORT-(WIT-VM250)-420ML - 6

All-rounder injectable mortar WIT-VM 250

All-rounder chemical injection mortar WIT-VM 250
ANC-MORT-(WIT-VM250)-420ML

Art.-no. 0903450205
EAN 4056807186931
All versions

Prices for customers after login

Exclusively for registered customers

Register now and access more than 20,000 products

The all-rounder for concrete, masonry and post-installed rebar connections

Two-component resin mortar, styrene-free vinyl ester



Individual fixing point, cracked and uncracked concrete, seismic performance category C1


W-VI-A anchor rod, W-VD-A anchor rod, standard threaded rod with acceptance test certificate 3.1



Individual fixing point for masonry (system with WIT-SH perforated sleeve):


WIT-SH perforated sleeve, WIT-AS anchor rod, WIT-IG internally threaded sleeve



Individual fixing point for masonry (system with SH perforated sleeve):


SH perforated sleeve, W-VI-A anchor rod, W-VI-IG internal thread anchor, standard threaded rod with acceptance test certificate 3.1



Post-installed rebar connection

Proof of Performance
  • European Technical Assessment ETA-12/0164: Individual fixing point + cracked and uncracked concrete (W-VD-A anchor rod, standard threaded rod with acceptance test certificate 3.1), seismic performance category C1

  • European Technical Assessment ETA-13/1040: Individual fixing point + masonry consisting of solid and perforated block, autoclaved aerated concrete (WIT-SH perforated sleeve, WIT-AS anchor rod, WIT-IG internally threaded sleeve, autoclaved aerated concrete only with WIT-SH 18x95 perforated sleeve)

  • European Technical Assessment ETA-16/0757 and ETA-20/0854: Individual fixing point + masonry consisting of solid and perforated block, autoclaved aerated concrete (SH perforated sleeve, W-VI-A anchor rod, W-VI-IG internal thread anchor, threaded rod with acceptance test certificate 3.1, autoclaved aerated concrete only without perforated sleeve)

  • European Technical Assessment ETA-12/0166: Post-installed rebar connection, 330 ml, 420 ml and 825 ml cartridges only
Application area
Awning
Steel supports
Brackets
French balconies

Drill holes with a rotary drill (without impact mechanism)

Clean the drill hole:


2x blow out/2x mechanical brush out/2x blow out

Cut anchor rod to length and mark the desired insertion depths

Insert perforated sleeve

Screw mixer onto cartridge

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Completely fill with composite mortar from end of perforated sleeve

Press in anchor rod up to the bottom of the sleeve while turning slightly

Load can be applied to the reinforcement bar after observing the curing time

Mount component; do not exceed maximum torque

Cut tubular film clip before use!

Screw mixer onto cartridge

Before use, dispense a bead of approx. 20 cm

Create the drill hole

Clean the drill hole:


Blow out 4x with compressed air/brush out 4x mechanically/blow out 4x with compressed air

Cut anchor rod to length and mark the desired insertion depths

Screw mixer onto cartridge

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Fill composite mortar from bottom of drill hole

Press in anchoring element up to drill hole base while turning slightly

Visual check of mortar volume, embedment depth mark

Load can be applied to the reinforcement bar after observing the curing time

Mount the component. Do not exceed the maximum torque

Cut tubular film clip before use!

Screw mixer onto cartridge

Before use, dispense a bead of approx. 20 cm

Drill the hole

Clean the drill hole:



Blow out 4x with oil-free compressed air (min. 6 bar)


Brush out 4x mechanically


Blow out 4x with oil-free compressed air (min. 6 bar) (d. <20 mm and d. < 10xds)


Blow out 4x with hand pump, brush out 4x mechanically, blow out 4x with hand pump

Place the embedment depth mark on the rod and check the drilling hole depth

Screw mixer onto cartridge

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Mount injection equipment, fill composite mortar from bottom of drill hole

Insert the reinforcement bar until it reaches the mark, turning slightly

Visual check of the mortar volume, observe maximum processing time

Load can be applied to the reinforcement bar after observing the curing time
Minimum curing times in concrete
Temperature of base materialProcessing timeMinimum curing time in dry concreteMinimum curing time in wet concrete
≥ -10 °C1)90 min24 h48 h
≥ -5 °C2)90 min14 h28 h
≥ 0 °C2)45 min7 h14 h
≥ +5 °C2)25 min2 h4 h
≥ +10 °C2)15 min80 min160 min
≥ +20 °C2)6 min45 min90 min
≥ +30 °C2)4 min25 min50 min
≥ +35 °C2)2 min20 min40 min
≥ +40 °C3)1.5 min15 min30 min
1) Cartridge temperature: ≥ +15 °C
2) Cartridge temperature: +5 °C to +25 °C
3) Cartridge temperature: < 20 °C
Minimum curing times in masonry
Temperature of base materialProcessing timeMinimum curing time in dry masonryMinimum curing time in wet masonry
-10 °C to -6 °C1)90 min24 h48 h
-5 °C to -1 °C2)90 min14 h28 h
0 °C to +4 °C2)45 min7 h14 h
+5 °C to +9 °C2)25 min2 h4 h
+10 °C to +19 °C2)15 min80 min160 min
+20 °C to +24 °C2)6 min45 min90 min
+25 °C to +29 °C2)4 min25 min50 min
+30 °C to +40 °C3)2.5 min15 min30 min
1) Cartridge temperature: ≥ +15 °C
2) Cartridge temperature: +5 °C to +25 °C
3) Cartridge temperature: < +20 °C
  • European Technical Assessment ETA-12/0164: Individual fixing point + cracked and uncracked concrete (W-VD-A anchor rod, standard threaded rod with acceptance test certificate 3.1), seismic performance category C1

  • European Technical Assessment ETA-13/1040: Individual fixing point + masonry consisting of solid and perforated block, autoclaved aerated concrete (WIT-SH perforated sleeve, WIT-AS anchor rod, WIT-IG internally threaded sleeve, autoclaved aerated concrete only with WIT-SH 18x95 perforated sleeve)

  • European Technical Assessment ETA-16/0757 and ETA-20/0854: Individual fixing point + masonry consisting of solid and perforated block, autoclaved aerated concrete (SH perforated sleeve, W-VI-A anchor rod, W-VI-IG internal thread anchor, threaded rod with acceptance test certificate 3.1, autoclaved aerated concrete only without perforated sleeve)

  • European Technical Assessment ETA-12/0166: Post-installed rebar connection, 330 ml, 420 ml and 825 ml cartridges only
Before use, express a string of mortar about 10 cm (420 ml cartridge) or 20 cm (sausage pack cartridge 300 ml) long until the mortar has a
uniform grey colour

Note: 330 ml cartridge not available in Australia

For anchoring in perforated brick use with the Art: 090344 ***
Perforated Sleeve SH range
Product information

Wurth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

 | 

 | 

Note: Maximum download of 5 Models per day.
Click here for the complete CAD library.
Application area
  • Anchoring in cracked and uncracked concrete, masonry consisting of solid and perforated brick, aerated concrete and for post-installed reinforcement rods.

  • Suitable for attaching metal structures, metal profiles, wooden structures, brackets, grids, pipes, cable conduits etc.
Instructions

A 330 ml and 420 ml cartridge can continue to be used until the best before date, by changing the mixer nozzle or resealing it with the end cap.

Type description

WIT-VM 250

Contents

420 ml

Included in delivery

Mortar cartridge 420 ml (coaxial) + 1 x mixer nozzle

Suitable application gun

Battery-powered application gun 420ml, Application gun MULTI, Application gun WIT 420ml, Pneumatic application gun 420ml, EasyMax 420 ml, HandyMax 420 ml

Min./max. processing temperature /conditions

-10 to 40 °C / temperature in the anchorage ground during processing and hardening

Min./max. ambient temperature / Conditions

-40 to 120 °C / after completely curing process

Temperature resistance, long-term temperatures max.

72 °C

Temperature resistance, short-term temperatures max.

120 °C

Shelf life from production/conditions

18 Month / cool and dry storage area, 5°C to 25°C

Approval

ETA-12/0164, ETA-13/1040, ETA-12/0166, ETA-16/0757, ETA-20/0854

Chemical basis

Vinylester, styrene free

Colour

Grey

1) Maximum long-term temperature
2) Maximum short-term temperature
3) The partial safety factors of the resistances regulated in the approval and ETAG 029 and a partial safety factor of the actions of γF = 1.4 have been taken into account.
4) If the characteristic spacing and edge distances are reduced, the admissible loads must also be reduced. The smallest possible spacing or edge distance is the minimum spacing smin or minimum edge distance cmin
5) For combinations of tensile and shear loads, bending moments or reduced edge distances and spacings, see the European Technical Assessment. If the masonry joints are not visible, the load capacity should be reduced by a factor of αj = 0.75. If the masonry joints are visible (e.g. on an unplastered wall) the following should be observed: 1. The load capacity may only be assessed when the masonry joint is filled with mortar. 2. If the masonry joints are not filled with mortar, the load capacity may only be assessed if the minimum edge distance cmin to the perpend joints has been adhered to. If this minimum edge distance cmin is not adhered to, the load capacity should be reduced by a factor of αj = 0.75. Documentation for brick removal must also be supplied in accordance with ETAG 029 Annex C.
6) The brick and hole geometry must be taken from the European Technical Assessment.
7) Nadm or Vadm applies for the edge distance ccr, clip value (Nadm) or (Vadm) applies for the minimum edge distance (cmin).
Anchor size Brick compressive strength [N/mm²] Brick density [kg/dm³] Brick format6) [mm] Effective anchorage depth hef [mm] Minimum member thickness hmin [mm] Maximum installation torque Tinst,max [Nm] Admissible tensile load3)4)5) (individual anchor without influence of the edge distance) Nadm [kN] Admissible shear load3)4)5) (individual anchor without influence of the edge distance) Vadm [kN] Char. spacing parallel to bed joint4) scr || [mm] Char. spacing perpendicular to bed joint4) scr ⊥ [mm] Minimum spacing 4) smin [mm] Char. edge distance ccr [mm] Minimum edge distance4) cmin [mm]
Solid brick Mz-DF EN 771-1
M8
Perforated sleeve 12x80 		10 1,64 240 x 115 x 55 80 115 2 1.0 (0.43)7) 1.0 (0.34)7) 240 240 120 120 (60)7)
20 1,64 240 x 115 x 55 2 1.29 (0.71)7) 1.43 (0.43)7)
28 1,64 240 x 115 x 55 2 1.57 (0.71)7) 1.57 (0.57)7)
M8
Perforated sleeve 16x85 		10 1,64 240 x 115 x 55 85 115 2 1.0 (0.43)7) 1.0 (0.34)7) 255 255 120 127,5 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
28 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M8
Perforated sleeve 16x130 		10 1,64 240 x 115 x 55 130 195 2 1.0 (0.43)7) 1.0 (0.34)7) 390 390 120 195 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
28 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M10/IT M6
Perforated sleeve 16x85 		10 1,64 240 x 115 x 55 85 115 2 1.0 (0.43)7) 1.0 (0.43)7) 255 255 120 127,5 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
28 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M10
Perforated sleeve 16x130 		10 1,64 240 x 115 x 55 130 195 2 1.0 (0.43)7) 1.0 (0.43)7) 390 390 120 195 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
27 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M12/IT M8
Perforated sleeve 20x85 		10 1,64 240 x 115 x 55 85 115 2 1.0 (0.43)7) 1.0 (0.43)7) 255 255 120 127,5 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
27 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M12
Perforated sleeve 20x130 		10 1,64 240 x 115 x 55 130 195 2 1.0 (0.43)7) 1.0 (0.43)7) 390 390 120 195 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
27 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M12
Perforated sleeve 20x200 		10 1,64 240 x 115 x 55 200 240 2 1.0 (0.43)7) 1.0 (0.43)7) 600 600 120 300 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
27 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M16/IT M10
Perforated sleeve 20x85 		10 1,64 240 x 115 x 55 85 115 2 1.0 (0.43)7) 1.0 (0.43)7) 255 255 120 127,5 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
28 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M16
Perforated sleeve 20x130 		10 1,64 240 x 115 x 55 130 195 2 1.0 (0.43)7) 1.0 (0.43)7) 390 390 120 195 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
28 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
M16
Perforated sleeve 20x200 		10 1,64 240 x 115 x 55 200 240 2 1.0 (0.43)7) 1.0 (0.43)7) 600 600 120 300 (60)7)
20 1,64 240 x 115 x 55 2 1.43 (0.71)7) 1.43 (0.43)7)
28 1,64 240 x 115 x 55 2 1.71 (0.86)7) 1.57 (0.57)7)
Solid sand-lime block KS-NF EN 771-2
M8
Perforated sleeve 12x80 		10 2,0 240 x 115 x 71 80 115 2 1.0 (0.43)7) 0.71 (0.43)7) 240 240 120 120 (60)7)
20 1.43 (0.71)7) 1.14 (0.71)7)
27 1.71 (0.86)7) 1.29 (0.71)7)
M8
Perforated sleeve 16x85 		10 85 115 0.86 (0.43)7) 0.71 (0.43)7) 255 255 120 127,5 (60)7)
20 1.29 (0.57)7) 1.14 (0.71)7)
27 1.43 (0.71)7) 1.29 (0.71)7)
M8
Perforated sleeve 16x130 		10 130 195 0.86 (0.43)7) 0.71 (0.43)7) 390 390 120 195 (60)7)
20 1.29 (0.57)7) 1.14 (0.71)7)
27 1.43 (0.71)7) 1.29 (0.71)7)
1) Maximum long-term temperature
2) Maximum short-term temperature
3) The partial safety factors of the resistances regulated in the approval and ETAG 029 and a partial safety factor of the actions of γF = 1.4 have been taken into account.
4) If the characteristic spacing and edge distances are reduced, the admissible loads must also be reduced. The smallest possible spacing or edge distance is the minimum spacing smin or minimum edge distance cmin.
5) For combinations of tensile and shear loads, bending moments or reduced edge distances and spacings, see the European Technical Assessment. If the masonry joints are not visible, the load capacity should be reduced by a factor of αj = 0.75. If the masonry joints are visible (e.g. on an unplastered wall) the following should be observed: 1. The load capacity may only be assessed when the masonry joint is filled with mortar. 2. If the masonry joints are not filled with mortar, the load capacity may only be assessed if the minimum edge distance cmin to the perpend joints has been adhered to. If this minimum edge distance cmin is not adhered to, the load capacity should be reduced by a factor of αj = 0.75. Documentation for brick removal must also be supplied in accordance with ETAG 029 Annex C.
6) The brick and hole geometry must be taken from the European Technical Assessment.
7) Nadm or Vadm applies for the edge distance ccr, clip value (Nadm) or (Vadm) applies for the minimum edge distance (cmin).
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU

MIX-DWL-PLA-WIT

For WIT cartridges of WIT-VM 250, WIT-VM 100, WIT-Nordic, WIT-Express, WIT-PM 200, WIT-EA 150 systems with cleaning element
x 1 pcs

EXT-(F.MIX-DWL)-PLA-10X200

Extension for the mixer nozzle
x 10 pcs

PSTNPLG-(WIT-VS)-24MM

x 10 pcs

PSTNPLG-(WIT-VS)-28MM

x 10 pcs

PSTNPLG-(WIT-VS)-32MM

x 10 pcs

ANC-(W-VD-A/S)-(A2K)-20-M8X110

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-60-M8X150

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-15-M10X115

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-30-M10X130

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-10-M12X135

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-35-M12X160

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-20-M16X165

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-45-M16X190

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-105-M16X250

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-155-M16X300

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-20-M20X220

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-60-M20X260

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-100-M20X300

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 10 pcs

ANC-(W-VD-A/S)-(A2K)-15-M24X260

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 5 pcs

ANC-(W-VD-A/S)-(A2K)-55-M24X300

For compound anchor cartridge system W-VD and WIT injection systems in concrete. Zinc-plated steel
x 5 pcs

ANC-(W-VD-A/A4)-A4-20-M8X110

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-60-M8X150

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-15-M10X115

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-30-M10X130

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-90-M10X190

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-10-M12X135

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-35-M12X160

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-85-M12X210

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-125-M12X250

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-20-M16X165

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-45-M16X190

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-105-M16X250

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-155-M16X300

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-20-M20X220

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-60-M20X260

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-100-M20X300

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 10 pcs

ANC-(W-VD-A/A4)-A4-15-M24X260

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 5 pcs

ANC-(W-VD-A/A4)-A4-55-M24X300

For W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete
x 5 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU

APPLGUN-F.DWL-(WIT-MULTI)

For application of virtually all WIT cartridges and silicone cartridges
x 1 pcs

BLWOTPMP-F.BRHOCLN-LAR

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU

MANCLKGGUN-CART-RED/BLACK-310ML

High-quality design, semi-open, made of sheet steel with plastic handle
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Wurth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details