Welcome to Würth Australia

More than 20,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

Diamond cutting disc, speed, tile For tiles and comparable materials up to approx. 20 mm thickness

Diamond cutting disc Speed tile

Art.-no. 5526830126
EAN 4050382283979

Prices for customers after login

Exclusively for registered customers

Register now and access more than 20,000 products

With closed edge for a quick and clean cut

Optimal cut

The cooling function of the structured segment sides allows for closure of the compensation slots as a result of heat-induced expansion. This enables an edge with a closed cutting surface.

Reduced steering forces

The disc is also stabilised with systematic reinforcement around the flange.

Extended service life

In comparison to conventional tile-cutting discs, the 10-mm-high segment guarantees a considerably longer service life.

  • Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds

  • If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts

  • Cut larger workpiece cross-sections into several sections (swing cut)

  • Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.

  • Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!

  • Despite the level of safety offered by the tool, always wear safety glasses and clothing while working

  • Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions

  • The direction arrow on the disc must match the machine's direction of rotation

  • Must not be used for lateral grinding

  • Use the appropriate protective hood

  • Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)

  • If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Product information


Certificates/ Documents



Application area
  • For angle grinders

  • For dry and wet cutting

  • Tiles, stoneware, glazed tiles, earthenware (gres), soft/hard granite, other natural stone, glazed pantiles, soft clinker brick, marble

Versatility (points system)

3 of 4 points

Service life (points system)

3 of 4 points

Cutting speed (point system)

4 of 4 points

Cut quality (point system)

3 of 4 points

Diameter (Ø)

125 mm

Drill hole

22.23 mm

Segment height

10 mm

Segment thickness

1.4 mm

Segment connection


Max. rotation speed

12200 rpm

Max. circumferential speed

80 m/s

Cust. Mat. No.

Hazardous Material

Product information


Datasheets ()

CAD data  | 

Certificates/ Documents



Technical information