Welcome to Würth Australia

More than 15,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

Fixing anchor W-FA/F

Fixing bolt anchor W-FA steel hot dip galvanized

Art.-no. 5932912110

Prices for customers after login

Fixing anchor W-FA/F

Art.-no. 5932912110

Prices for customers after login



x25 pcs

Exclusively for registered customers

Register now and access more than 15,000 products

Stud anchor for standard applications in non-cracked concrete. Hot-dip galvanised steel
  • Time-saving push-through installation

  • Immediate load-bearing capacity — no waiting

  • Torque-controlled expanding anchor made from hot dip galvanised steel

  • Two anchorage depths — wide range of applications

Product information

Wurth Catalogue(X)

Catalogue page as PDF 1  |  2  |  3

Flip catalog


CAD data (available after login)

Application area
  • Individual attachment: Standard concrete C20/25 to C50/60 (non-cracked concrete)

  • Suitable for fastening metal structures, metal profiles, brackets, base plates, supports, cable conduits, pipes, wooden structures, beams, purlins etc.

  • Can be used in concrete < C20/25 and compression-proof natural stone (without approval)

  • The anchor may be used for anchoring with predominantly static loads (e.g. tare weight, fittings, stored materials) or quasi-static loads (e.g. façades, railings)

  • W-FA/F may only be used in dry indoor room conditions

Metric anchor diameter


Anchor length (l)

110 mm

Attachment height (t fix)/effective anchoring depth (he ef)/drill hole depth (h 1)

15 / 65 / 90 mm

Attachment height (t fix 2)/effective anchoring depth (h ef 2)/drill hole depth (h 1, 2)

30 / 50 / 75 mm

Width across flats

19 mm

Nominal drill-bit diameter (d 0)

12 mm




Hot dip galvanized

Torque during anchoring (T inst)

40 Nm

Through-hole in the component to be connected (d f)

14 mm



Additive article:



For fast and precise hammering in of Würth fixing bolt anchors W-FAZ PRO, W-FAZ (M8–M16) and W-FAZ with hammer drill
x 1 pcs

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:

Information on price display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units


The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Wurth Catalogue

Catalogue page as PDF  | 


Datasheets ()

CAD data  | 




Technical information