Assembly power cleaner

High cleaning performance

Ideal for the removal of oily, greasy, sooty, and lightly resinified dirt

Short flash-off time

• Fast cleaning with no residue


• Short downtime of the machine parts to be treated


• No second application required

Good material compatibility

• FKM and polymer seals do not swell.


• Causes no corrosion on metal surfaces such as iron, steel, stainless steel, aluminium, brass

Spray head with direct jet

Targeted and effective cleaning of contaminated parts

Acetone-, AOX- and silicon-free

NSF K1 registered (no.: 150705, 150706), complies with requirements of USDA K1.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.