Welcome to Würth Australia

More than 20,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

Hard wax, assortment

Hard wax assortment
RETCHWAX-SORT-HARDWAX-20PCS

Art.-no. 09648906
EAN 4099618297175

Prices for customers after login

Exclusively for registered customers

Register now and access more than 20,000 products

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major stresses.

High strength


  • Especially for repairing areas exposed to high loads within the surface area

  • High abrasion resistance


Large choice of colours


  • Matching colours for a wide range of different wood colours

  • Broad range of applications


Colours can be mixed with each other


  • For optimum adaptation of the colour to the surface

  • Enables improved matching of wood grains


Inexpensive and simple repair instead of replacement or costly new treatment of the whole surface

Notice
  • Suitable for indoor use

  • Please follow the application instructions included with each assortment pack precisely

  • Please note that wood has a natural colour which is dependent on many different factors (e.g. origin, exact type of tree, surface treatment etc.). Therefore, an inconspicuous touch-up can never be carried out with a single wax colour.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For filling deep cracks and scratches, open joints, holes and dents subject to major stresses. Suitable for front, surface and edge areas, as well as table-top surfaces, parquet floors and stair treads etc.

Instructions

Process the damaged area with the heated tip of the gas melter (art. no. 0890 305 3).


Allow the hard wax to cool down and remove excess areas using the plastic plane (art. no. 0890 305 30).


Trace the wood grain with touching-up materials and restore the pore pattern. Finally, seal the site with clear varnish (art. no. 0893 188 2/0893 188 3). For more information, please refer to the technical data sheet.

Number of pieces in assortment/set

20 PCS

Min. processing time

3 min

Max. processing time

5 min

Softening point

76 °C

Conditions for softening point

in accordance with ISO 2207

Min. dripping point

81 °C

Dripping point conditions

in accordance with DIN 51801

Min. flashing point

100 °C

Water-soluble

No

Shelf life from production

4 Years

Conditions to maintain shelf life from production

at room temperature

including:
1 x

RETCHWAX-FUS-WHITE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-COLOURLESS

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-MAPLE-NATURE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-PINE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-MAPLE-MIDDLE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-BEECH-MIDDLE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-SEN-ASH

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-ALDER-MIDDLE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-BEECH-DARK

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-OAK-BRIGHT

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-CHERRYTREE-MIDDLE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-PEARTREE-MIDDLE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-PEARTREE-DARK

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-RUSTIC-OAK

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-OAK-DARK

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-BROWN

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-WALNUT-MIDDLE

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-MAHOGANY-BROWN

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-BOG-OAK

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x

RETCHWAX-FUS-DEEP-BLACK

Description: For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU

PLN-F.SRF-PLA

For applying fillers such as 2-component repair filler RSM, hard, soft and retouching wax.
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information