Leak detector

Name: Leak detector
Brand: Wurth
SKU: 089020

Leak detector
LKDETR-AEROSOLCAN-400ML

Art.-no. 089020

EAN 4045989475919

All versions

Similar products

Prices for customers after login

Leak detector

Art.-no. 089020

Prices for customers after login

Quantity

Exclusively for registered customers

Login/Register
Call customer service: 1300 65 77 65

Detects leaking areas in compressed air and gas systems

Effortless, time-saving detection of pressurised, leaking areas with success guaranteed

Non-flammable, therefore can also be used on systems, containers and pipes with flammable gases

Processing temperature: +5°C to +50°C

Freezes at 0°C

Notice

Is resistant to frost, can be applied again once thawed.

When using with systems containing oxygen, it must be ensured that these are constantly pressurised during testing. If not, low pressure could result in the leak-finding fluid entering the system and reacting with the oxygen. Rinse residual leak-finding fluid out with clear water immediately after testing.

Only spray suspected areas lightly; leaks are shown by foam forming

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Wurth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Suitable for compressed air brake systems, tyres, hoses, valves, pipework, fittings, compressed air containers, compression systems etc.

Contents	0.4 l
Colour	Colourless
Smell/fragrance	Product-typical
Chemical basis	Water, soap and glycol
Shelf life from production	24 Month
Min. temperature conditions	5 °C
Max. temperature conditions	40 °C
Surface tension	0.02 N/m
Density	1 g/cm³
Density/conditions	1 g/cm³ / at 20°C
pH value	6.5-7.5

Additional accessory:

Product

Description

Quantity

Price
/PU

TAP-(F.PLACANI-5LTR)

Art.-no. 089130201

The tap makes it quick and easy to cleanly fill up and dispense liquids and helps with dosing large amounts of liquid in a short period of time.

x 1 pcs

TAP-(F.PLACANI-20/60LTR)

Art.-no. 089130203

For plastic canisters with DN 60 connection for 20 L/25 L and 60 L

x 1 pcs

PMPSPRBTL-EMPTY-LEAKDETECTOR-1LTR

Art.-no. 089150201

Refillable empty pump spray bottle for easy application of products from canisters or drums

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Fitting products for your order

Leak detector