450+ Sales Representatives
Nail anchor SHARK® Hammer TYPE FK A2
SHARK HAMMER nail anchor A2 flat collar type FK
DWL-(SHARK HAMMER)-FK-PLA-NL-A2-10-6X40
ZEBRA-SHARK
Art.-no.
590634640
EAN 4061975320339
Prices for customers after login
Exclusively for registered customers
Register now and access more than 20,000 products
With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using push-through installation. Wall plug body with flat collar nail made from A2 stainless steel
- Quick, cost-effective installation
- Can be removed via drive in screw head
- Pre-assembled with matching screw
- Suitable for in-place installation
- Defined integrated hammer-in stop prevents premature expansion
- For countersunk and protruding finish
- Rot-resistant (plastic anchor made of high-quality polyamide)
- Resistant to UV rays
- Halogen-free
Application area
C-profile rails in dry walling
Cable ducts
C-profile rails in dry walling
Cable ducts
Product information
Datasheets(X)
Application area
- Can be used in concrete and masonry
- For any light-load fittings in interior finishing as well as wood, metal, plumbing and electrical applications, e.g. securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation
Anchor diameter | 6 mm |
Anchor length (l) | 40 mm |
Max. attachment height (t fix) | 10 mm |
Embedding depth (h nom) | 30 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Drill hole depth (h 1) | 35 mm |
Hole diameter in component (d f) | 6.5 mm |
Material of nail | Stainless steel A2 |
Surface | Plain |
Tightening torque (T inst) | 6 Nm |
Internal drive | Z2 |
| Recommended loads | Concrete C20/25 | Frec [kN] | 0,2 | 0,3 | 0,35 |
| Sand-lime brick KS 12 | 0,2 | 0,3 | 0,35 | ||
| Hollow sand-lime brick KSL 12 | 0,1 | 0,12 | 0,13 |
| Embedment depth | hnom ≥ [mm] | 25 | 30 | 40 |
| Thread dia. (THREAD type only) | dthr. [mm] | - | 6 | - |
| Thread length (THREAD type only) | Ithr. [mm] | - | 6 | - |
| Nominal drill diameter | d0 [mm] | 5 | 6 | 8 |
| Hole diameter in component | df [mm] | 5 | 6 | 8 |