Welcome to Würth Australia

More than 20,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

Solid carbide spot-weld drill bit with three cutting edges

Solid carbide spot weld cutter 3 cutt. Vario Drill
CTR-SPTWELD-SC-D6-VD-3C

Art.-no. 0710810600
EAN 4053479279213
Prices for customers after login

Exclusively for registered customers

Register now and access more than 20,000 products

For drilling out/milling spot welds on car bodies with high-tensile steel plates in all types of cars on A-pillars, B-pillars, door sills etc.

Excellent centring of the drill bit on the spot weld


Wide yet robust tip geometry



Extremely long service life


Innovative Magma coating on the drill tip

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Can be used with Spitznagel drill devices and the Wieländer & Schill Vario Drill and all three-jaw chuck drills.
Instructions
  • Solid carbide is extremely hard, making it very brittle and prone to breaking if not handled correctly.

  • Position the drill bit precisely and at a right angle. Place the drill bit in the centre, then start drilling, making sure that you apply contact pressure evenly.

  • We recommend drilling at a consistent speed, at a maximum of 1800 rpm.

  • The following must be avoided: interrupted cuts, forcing the drill bit, jolting the drill bit sideways and dropping the drill bit.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information