WG-Fix screw, raised countersunk head
Screw anchor, WG-FIX, raised countersunk head
SCRDWL-HILO-WGFIX-AW20-(A2K)-6,3X45
Register now and access more than 20,000 products
- Quick and easy assembly
- AW drive for longer bit service life, improved power transmission and no ejection forces
- Head variant raised countersunk head for easy and clean countersinking
- HiLo thread provides for increased over-turning torque
- High thread pitch enables fast screw-in speed.
Screw in with high extra load, low rotation speed and torque limiter. Stop screwing in once the screw is firmly seated. Insert screw into gypsum plasterboard without pre-drilling.
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/normal/348px/60011151.jpg)
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/normal/348px/65790995.jpg)
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/normal/348px/38175413.jpg)
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/219556.jpg)
Create the drill hole
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/219557.jpg)
Clean the drill hole
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/219558.jpg)
Screw in screw anchor
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/219560.jpg)
As soon as screw anchor makes firm contact, do not screw in further
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/219559.jpg)
Screw in screw anchor
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/219561.jpg)
As soon as screw anchor makes firm contact, do not screw in further
Datasheets(X)
- Suitable for use in clay brick, solid sand-lime brick and gypsum plasterboard
- For fastening curtain rails, baseboards, picture frames, bathroom and kitchen accessories etc.
![]() | |
Head type | Countersunk head |
Internal drive | AW20 |
Anchor diameter | 6.3 mm |
Anchor length (l) | 45 mm |
Max. attachment height (d a) | 16 mm |
Material | Steel |
Surface | Zinc plated |
Nominal drill-bit diameter (d 0) | 4 mm |
Drill hole depth (h 1) | 35 mm |
Through-hole in the component to be connected (d f) | 6.5 mm |
Anchor diameter [mm] | 6,3 | ||
Performance data | |||
Recommended working load | Clay brick, Mz | Frec. [kN] | 0,23 |
Solid sand-lime brick, KSV | 0,43 | ||
Gypsum plasterboard d ≥ = 9.5 mm | 0,01 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!