Welcome to Würth Australia

More than 20,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

Anti-static plastic cleaner type 20

Anti-static plastic cleaner type 20
PLACLNR-20-PVC-1LTR

Art.-no. 089210011
EAN 4062856618712
Prices for customers after login

Exclusively for registered customers

Register now and access more than 20,000 products

Non-corrosive cleaning agent with antistatic agent for various plastics and powder-painted and metallic surfaces
  • Anti-static – effectively prevents the rapid re-soiling of surfaces

  • Quick-drying cleaner

  • Free of chlorinated hydrocarbons and aromatic compounds

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area
  • For cleaning various plastics such as rigid PVC (white), décor, film-laminated and PUR profiles and PVC rigid foam panels, as well as powder-painted and metallic surfaces in specialist companies.

  • In the sectors of window and door construction, trade fair construction, signage and advertising industry, stone industry and other areas of the plastics processing industry and trades (gutters, drainage pipes etc.).

  • Removes dust, traces of adhesive from protective films, wax crayon, rubber tracks, fresh sealant residues as well as tar and bitumen splashes.

  • The inbuilt static inhibitor effectively prevents rapid re-contamination of profile surfaces.

Contents

1000 ml

Container

Can

Smell/fragrance

Characteristic

Colour

Colourless

Chemical basis

Mineral oil

Density/conditions

0.71 g/cm³ / at 20°C, EN 542

Min. flashing point

-14 °C

Shelf life from production/conditions

24 Month / cool and dry storage area, no exposure to sunlight, 15°C to 25°C

AOX-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information