Welcome to Würth Australia

More than 20,000 products

All major credit cards accepted

450+ Sales Representatives

Toll free 1300 65 77 65

High tack adhesive MS5

SMP adhesive sealant MS5

Art.-no. 0892329101
EAN 4046777407044

Prices for customers after login

Exclusively for registered customers

Register now and access more than 20,000 products

Fast-hardening, high-modulus, UV & weather resistance 1K polymer adhesive with high initial tack.

No hazard

Isocyanates and solvents free, user-friendly

High initial tack

Fast fixing, time saving, no need of extra supporting accessories in most of the cases

UV & Weather resistance

Suitable for outdoor application. Long service life

Primeless on wide range of surface

Can be applied without primer to most of the surface. (except PTFE, PE, PP)

Suitable for paint over

Can be painted over on conventional paint system. (even wet on wet)

  • These instructions are only recommendations, which are based on our experience. We advise preliminary testing before use.

  • Reserved for industrial and professional use.
Product information


Safety data sheet

Certificates/ Documents



Application area

Elastic bonding and sealing in eg. bus-, train-, caravan-, metal construction, can apply on a wide range of substrate materials such as metal, painted suface, timber stone, concrete and plastic.

  • The application surface must be clean, dry dust-and grease-free

  • In bonding applications the substrates have to be assembled within 15 minutes (at 20 °C/50% R.H.) after applying MS5

  • The higher the temperature, the shorter the open time will be!

  • In general, an adhesive thickness of 2 mm is recommended if similar materials (similar stiffness) are bonded. The larger the difference in thermal expansion is, the thicker the adhesive bead should be

  • Working temperature: 5 °C to 35 °C.


290 ml



Chemical basis

MS polymer




1.4 g/cm³ / at 20°C, 50% relative humidity

Full curing speed/conditions

4 mm/d / 20°C and 50% relative humidity. Depending on the strength of caterpillars.

Min./max. processing temperature

5 to 35 °C

Conditions for tensile strength

in accordance with DIN 53504

Breaking elongation conditions

in accordance with DIN 53504

Shelf life from production/conditions

18 Month / cool and dry storage area, 5°C to 25°C



Cust. Mat. No.

Hazardous Material

Product information


Datasheets ()

CAD data  | 

Certificates/ Documents



Technical information