Welcome to Würth Australia For trade customers only

ABN customers only

Toll free 1300 65 77 65

Purchase on account

400+ Sales Representatives

More than 11,500 products

Wing-type drilling screw, round countersunk milling head with AW drive pias®

Wing-pias steel flake zinc milling plate CS hd AW
SCR-DBIT-WING-PLTCS-CUT-AW30-RUS-6,3X80
ZEBRA PIAS

Art.-no. 021906380

Prices for customers after login

Wing-type drilling screw, round countersunk milling head with AW drive pias®

Art.-no. 021906380

Prices for customers after login

Quantity

PU

Exclusively for trade customers

Register now and access more than 11,500 products

Steel, Ruspert®-coated (grey), AW drive. The self-drilling screw with up to 50% time saving when fastening wood to metal sub-structures

Corrosion protection


Approx. 500 hrs. no base metal corrosion in accordance with DIN EN ISO 9227 — NSS



AW drive system


  • Enhanced torque transmission

  • Longer life

  • Optimum centring

  • Better mounting output thanks to fatigue-free screwing in; the required contact pressure for transmission of the torques is considerably lower

  • Largest possible contact surface of bit in screw drive

  • Even force distribution prevents damage to the surface-protection coating and therefore ensures better resistance to corrosion
Notice

Wing-pias must be appropriately tested for usability for each application case. Only install using application tools with depth stop and claw coupling.


The maximum attachment length is calculated as follows: Wood thickness and substructure thickness lU = max. attachment thickness lB

Drilling screws may only be used where dampness is not to be expected.


For connection elements with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.

Product information

Wurth Catalogue(X)

Catalogue page as PDF 1

Flip catalog

Datasheets(X)

CAD Data (available after login)

Certificates/Documents(X)

Application area

For use with hard and soft woods

Instructions
  • Force feeding of the screw is prevented by the wings drilling out the wood

  • The core hole is drilled into the substructure. The wings break off upon contact with the metal

  • The first few turns of the screw cut the thread, the remainder of the screw then screws into the thread

Material

Steel

Surface

Flake zinc grey

Nominal diameter (d1)

6.3 mm

Length (l1)

80 mm

Head diameter (dk)

20 mm

Drill tip length (lp)

13 mm

Other standard

Company standard

Head type

Disc countersunk head with milling ribs

Internal drive

AW30

Thread type

Self-tapping screw thread

For min. substructure thickness

2 mm

Max. material thickness to be drilled through (metal)

6 mm

Max. attachment thickness (lB)

58 mm

Min./max. recommended installation speed (idling)

800-1200 U/min(rpm)

RoHS-compliant

Yes